Chemical Solutions
Рус Eng

Phone

+7 (495) 989 22 69
Фильтр-прессы

Filter presses

Filter press Fraccaroli & Balzan with the innovative design of the upper suspension and the possibility of plates shaking

Filter press Fraccaroli & Balzan with the innovative design of the upper suspension and the possibility of plates shaking

The shipment of the ready-assembled filter press. Even the large filter-press does not require a special transport usage

The shipment of the ready-assembled filter press. Even the large filter-press does not require a special transport usage

Open access plates on the top and sides. Easy maintenance, minimum time for Plan Preventive Maintenance

Open access plates on the top and sides. Easy maintenance, minimum time for Plan Preventive Maintenance

Small automatic filter press with side suspension. It has top and side panels for protection against splashes

Small automatic filter press with side suspension. It has top and side panels for protection against splashes

Cam shaking system helps to ensure the operation of the filter without the an operator participation

Cam shaking system helps to ensure the operation of the filter without the an operator participation

Filter press with side suspension and separation displacement of a plates set by three blocks

Filter press with side suspension and separation displacement of a plates set by three blocks

High-performance unit of sludge dewatering on the filter press Fraccaroli & Balzan base

High-performance unit of sludge dewatering on the filter press Fraccaroli & Balzan base

Filter press is a versatile and efficient equipment for separation of liquid and solid phases.

At the moment we offer our customers a full range of filter press equipment Fraccaroli & Balzan (Italy) from the small manual filter presses to filter press with a filtration area of over 1000 m2, with visualization of the process and the possibility of remote control via the Internet.

The filter presses are made from both with the top and side suspension.

The selection of the filter press is based on many years dealing experience with in filter presses and by filter plates LENSER Filtration GmbH (Germany).

Video review

Questionnaire
download

Advantages:

  1. Steady operation when changing the parameters of the initial suspension.

  2. The simplicity and reliability of the design

  3. Application in a wide range of solids content in the dewatering slurry (from 1 up to 60% of solid phase)

  4. Integrated filtration process automation possibility

  5. Filtration of highly aggressive media under temperatures up to 120 °C as well

  6. High equipment utilization rate up to 99%

  7. Low operating and energy costs

Scope of application:

  • Chemical industry;

  • Metallurgical industry;

  • Mining industry;

  • Petrochemical industry;

  • Coal industry;

  • Cement production;

  • Sugar plant;

  • Food industry;

  • Pulp and paper industry;

  • Waste-water treatment.

Filter presses models

Filter presses model

Plate dimensions, mm

Quantity of press chambers, min-max

Percolation pressure, bar

Filter area, m2, min-max

Volume, l, min-max

К 400

400х400

10-50

макс. 16

2-15

15-120

К 470

470х470

10-50

макс. 16

3-20

30-200

К 630

630х630

15-65

макс. 16

10-45

100-500

К 800

800х800

20-100

макс. 16

25-100

300-1 200

К 1000

1000х1000

30-140

макс. 16/30

54-240

600-3 000

К 1200

1200х1200

30-140

макс. 16/30

70-350

1 200-4 000

К 1500

1500х1500

20-150

макс. 16/30

84-580

2 000-8 000

К 2000

2000х2000

80-180

макс. 16/30

610-1 200

5600-14 500


Principle of operation

Filter press flooding

Slurry feed pump delivers the suspension into the chambers of the filter press. There is filling all the filter chambers happen, begins the precipitate formation. This stage is characterized by the possible solid particles breakthrough.

Filtration

Time of this stage depends on the correctness of the chosen filter cloth and physicochemical properties of the suspension. There is an accumulation of solids in the chambers of the filter press. The work of the filter press is considered to be effective in the solids in the chambers to 75 – 95 % depending on application.

Cake drying (blow) / elutriation

Depending on the technological tasks there is flushing possible by water and other liquids, and the cake blowing with compressed air. These operations significantly increase the separation value of the slurry into various components.

Squeezing by diaphragm (in the case of the membrane filter press)

This operation allows to remove the liquid phase by a mechanical impact on the cake, while significantly reducing cycle time.

Core blow

Residues of liquid cake throw out by compressed air back into the storage reservoir.

Filter-press discharding

At this stage, the cake discharge occurs by spreading of the plates set by blocks to reduce the unloading time to a minimum.

Implemented projects

Chamber filter press with sidebars design and with shaking system

Chamber filter press with sidebars design and with shaking system

DELIVERY OF THE CHAMBER FILTER-PRESS WITH THE SYSTEM OF PLATE SHAKING FOR THE QUARTZ SAND

The task was to select and supply the press filter with the maximum degree of automation and the best price. The solution was found through the use of a plate shaking system. For well-filtered pulps it is possible to use chamber press filters. And to guarantee full automation of the process, it is better to use a plate shaking system

Increase profits by

5 %

Chamber filter press with sidebars design and with shaking system

Chamber filter press with sidebars design and with shaking system

DELIVERY OF THE CHAMBER FILTER-PRESS WITH THE SYSTEM OF PLATE SHAKING FOR THE QUARTZ SAND

The task was to select and supply the press filter with the maximum degree of automation and the best price. The solution was found through the use of a plate shaking system. For well-filtered pulps it is possible to use chamber press filters. And to guarantee full automation of the process, it is better to use a plate shaking system

Increase profits by

5 %

Chamber filter press with sidebars design and with shaking system

Chamber filter press with sidebars design and with shaking system

DELIVERY OF THE CHAMBER FILTER-PRESS WITH THE SYSTEM OF PLATE SHAKING FOR THE QUARTZ SAND

The task was to select and supply the press filter with the maximum degree of automation and the best price. The solution was found through the use of a plate shaking system. For well-filtered pulps it is possible to use chamber press filters. And to guarantee full automation of the process, it is better to use a plate shaking system

Increase profits by

5 %

 

Up

We want to offer you the best online experience. Therefore we use cookies to analyze, personalize and optimize content. For more information please read our privacy policy.