Filter cloths

Filtration of abrasive slurries – it is our strong point. Customers often have a problem with the neck when filtering highly abrasive suspensions. The neck breaks at the seams from the friction of solid particles. In this case, we offer EPDM rubber neck or a reinforced woven neck coated seams with rubber or polyurethane.

Cutting filter cloth is conducted only by using laser scissors, which guarantees the absence sprawling edges and long life of filter cloth.

For the convenience of fastening cloths and a tight seal to the drainage surface on the perimeter are always installed eyelets of stainless steel. If you need sewing napkins with Velcro "Velcro".

Depending on the properties of sludge may be an additional calendering filter cloth, and the surface treatment faces to the residue, a polyurethane composition layer thickness of tens to hundreds of nanometers. The latter slows down the clogging of the porous structure of the fabric, prolonging the service life.

In the case of filtration of aqueous suspensions under high pressure may leak through by fibers of the lining or main fabric. The solution to this problem is impregnation of cloths on the perimeter with a plastic waterproof composition.

Work directly with the manufacturers of the threads themselves and filter fabrics gives us the opportunity to design and produce the filter material directly below the terms of your filtration process. The density of the material, its structure, surface treatment and air permeability are set based on our research.