Waste Liquid Incinerator

Advantages:

1. Good pulverization effect, it adopts forth generation pulverization device with good burningeffect

2. Without second pollution, low nitrogen burning technology, without any smoke, smell or deleteriousgas

3. High safe performance, ultraviolet supervising system and complete warning systemwithout thedanger of explosion

4. Low malfunction rate, imported parts, dual-loop system, high quality and long lifetime

5. Good disposal effect with low cost for waste oil, waste liquid, waste solvent and organic wastegasatthe same time

Principle of operation

The main waste to be treated in this project is organic waste liquid, which enters the waste liquid storage tank in the incineration unit through various process pipelines for storage, and the incineration device processes 2 waste liquids in total.

The waste liquid in the waste liquid storage tank is pumped to the waste liquid spray guns on the top of the primary combustion chamber and the bottom of the secondary combustion chamber. Under the action of compressed air, the waste liquid enters the incinerator after being atomized. Under the action of oxygen-supplementing wind, the waste liquid is fully burned in the incinerator.

The ash enters the slag discharger and is finally transported to the silo for storage. The flue gas enters the secondary combustion chamber again, and combustible gases such as long and short chain hydrocarbons and CO in the flue gas are further turbulently mixed under the torsion of the secondary air, and can be fully exhausted under the "3T+E" environment.

Combustion will completely decompose dioxin-like substances. Under normal circumstances, the furnace temperature in the combustion chamber is above 1100°C, and the designed total residence time is above 2 seconds.

The organic hazards in the flue gas are completely destroyed and transformed into CO₂, SOX, and HCl gases to achieve the purpose of complete sterilization, disinfection, and deodorization.