Chemical Engineering Solutions Company successfully supplied and performed installation supervision work for the RTO system at the Krasny Bor waste landfill

Within the framework of this project, our employees developed technical documentation, selected equipment, and delivered it.

At the beginning of November, installation supervision work was successfully carried out on a 3-chamber RTO installation with all auxiliary equipment, including fans, a burner device, the necessary valves, air ducts, an inlet drop eliminator, instrumentation and a control cabinet.

Activated carbon adsorbers were also supplied as a backup air purification system for the period of planned or unscheduled shutdowns of the RTO.

During the processing processes at the landfill, air flows from the aspiration system will be generated that are contaminated with various volatile organic compounds.

The main advantages of the RTO system we installed are:

• Compact design that matches the dimensions of the customer’s designed site.
• The principle of regenerative thermal oxidation, which allows the process to be carried out with significant fuel savings and does not require additional devices for heat recovery.
• The use of a special ceramic nozzle with slotted channels, which has low hydraulic resistance and a low tendency to block the channels with a simultaneous high specific heat exchange surface.
• Reliable design of the main valves, preventing the problem of contaminated gas entering the purified gas.
• Temperature control system in the ceramic layer to prevent overheating and damage to the ceramics.
• Automatic hot gas bypass system to the RTO inlet to preheat the gas and prevent the problem of moisture condensation.
• Automatic bypass system of hot gas from the combustion chamber to the outlet of the RTO for the purpose of temperature control.
• Special solutions for outdoor installation of equipment, designed for operation at temperatures down to -40C.