Loading

0%

Chemical Solutions

Dryer with fluidized bed

The fluid bed drier with integrated heat exchangers in an explosive performance

The fluid bed drier with integrated heat exchangers in an explosive performance

Vibrating (shaker) drier

Vibrating (shaker) drier

Drier with fluidized bed with embedded heat exchangers in vertical design

Drier with fluidized bed with embedded heat exchangers in vertical design

Vibrating drier

Vibrating drier

Fluidized bed drier with a bulk hoppers

Fluidized bed drier with a bulk hoppers

Fluid bed drier with built-in heat exchangers

Fluid bed drier with built-in heat exchangers

Fluidized bed dryer apply to machine with high efficiency. Depending on the product properties and process parameters we offer dryers of vertical, horizontal design, vibration ones, equipped with heat exchangers, etc. The wet product is dried in a fluidized bed generated by gas. Heated gas flowing through the distribution system supports the drier fluidized bed in the drier chamber, which causes heat and mass transfer of the product with gas. In this case the generated mode effectively mixes the product, which increases the heat transfer coefficient and thus ensures uniform drying of the entire volume of product. As you move the product in a fluidized bed in the chambers of the dryer the exhaust gas is expelled through a system of cyclones and filters, and the dried product is then relayed by technology.

The size and other parameters of each installation are calculated in accordance with a given capacity, the flow rate and properties of the product.

Advantages:

  1. Gentle drying at low temperatures.

  2. Low operating costs.

  3. The possibility of drying of products having the form of granules, crystals or powder.

Scope of application:

  • drying, solvent recovery

  • cooling action (crystallization), etc.

  • for chemical, food, polymer and allied industries

Features:

High intensity drying

Specific hydrodynamic regime creation, the regulation of the residence time, the zoning allows to implement the product drying to a minimum residual moisture

Built-in heat exchanger

When using heat exchangers increases the efficiency of drying and reduces the amount of hot gas for drying also reduces the cost of auxiliary equipment (pump, heater, cyclones, etc.)

Gentle drying

Fluid bed drier in the regulated mode provides drying with minimal abrasion and destruction of the granules of the product

 

We want to offer you the best online experience. Therefore we use cookies to analyze, personalize and optimize content. For more information please read our privacy policy.